Fimbo za Tungsten Mango za Carbide kwa Miundo na Mazoezi yenye ubora thabiti wa hali ya juu

Maelezo Fupi:


  • Chapa: NCC
  • Asili ya bidhaa: Nanchang, Uchina
  • Safu ya Ukubwa: D1.0~40.0mm,L:13~700mm
  • MOQ: pcs 1
  • Sampuli: Inapatikana
  • Wakati wa utoaji: Siku 3-15
  • Uwezo wa Ugavi: 1,000,000pcs/Mwezi
  • Maelezo ya Bidhaa

    Lebo za Bidhaa

    Kuanzishwa kwa vijiti vya carbudi

    1.Vijiti vya carbudi vya tungsten imara hupigwa kwa ukingo au extrusion.

    2.Vijiti vya CARBIDE vya tungsten huchomwa na tanuru iliyounganishwa ya shinikizo la chini, hivyo utendaji wa jumla ni wa juu.

    3.Baa mbaya ya CARBIDE ya tungsten-cobalt, au kipenyo cha nje cha baa ya pande zote inaweza kusafishwa na kung'aa kulingana na uvumilivu wowote. Uvumilivu wa kawaida ni h5,h6, -0.005, nk, na chamfer ya mwisho ya fimbo za carbudi pia inaweza kusindika.

    Fimbo za 4.Carbide zinafaa kwa ajili ya usindikaji wa chuma cha jumla, chuma cha kutupwa, chuma cha pua, chuma sugu cha joto, msingi wa nikeli na aloi ya titani. Imependekezwa kwa madhumuni ya jumla ya nyenzo za zana za CARBIDE kama vile vibonzo vya kusokota, vinu, bomba na vifaa vya kuchimba bunduki.

    Utangulizi wa madaraja yetu

    1

    Aina zetu za Fimbo za Carbide

    1.Unground Fimbo ndefu

    TOL. ya Fimbo ndefu za Unground 
    Ukubwa(DxL,mm) Uvumilivu
    D(mm) L(mm)
    D[1-3)x310/330 0.30~0.55 0.00~+4.00
    D[3-12)x310/330 0.30~0.60 0.00~+4.00
    D[12-20)x310/330 0.30~0.65 0.00~+4.00
    D[20-40]x310/330 0.30~0.70 0.00~+4.00

    2.Vijiti vya kukata-kwa-urefu visivyozunguka

    TOL. ya vijiti vya kukata-kwa-urefu visivyo ardhini 
    D/L(mm) TOL.ya D&L katika mm
    L<=70 70<L<=150
    D<5 D(0.20~0.30),   L(0.20~1.5) D(0.25~0.35),  L(0.20~1.5)
    5<=D<40 D(0.25~0.35),  L(0.20~1.5) D(0.30~0.40),  L(0.20~1.5)

    3.Ground long rods

    The tolerance of the long rods is h5/h6 or at customer’s requirement in Dia. ,and 0.00~+5.00mm in Length as normal.

    4.Ground cut-to-length rods

    The tolerance of the ground cut-to-length rods is h5/h6 or at customer’s requirement in Dia. ,and 0.00~+2.00mm in Length as normal.

    5.PCB Rods

    1
    1

    Production Process

    1

    Industrial Solution

    1

    Why Choose NCC carbide

    more than 50 years production and management experience,Advanced production technology, High-precision machines, Strict QC management system, Special-designed packing boxes and tubes, Various shipping methods

    1

    1.Tungsten carbide blanks production

    Good quality carbide products rely on 100% virgin raw materials and advanced wet-milling,pressing machines and sintering furnaces. We put emphasize on every production process of our carbide blanks. To keep good quality of carbide blanks is the base of furtherly machined high precision finished carbide parts.

    2.Inspection and testing process

    In order to ensure the quality of all our tungsten carbide finished products, a very strict QC management system we called “Quality Control Center” has been introduced. With our advanced inspection equipment and our professional inspectors, we are able to do raw materials inspection, on-site inspection and after finishing inspection to ensure 100% good quality of your carbide products.

    1
    1

    3.Advanced CNC Equipment

    NCC owns a series of high-precision grind machines, including flat grinding machines, OD and ID machines, Centerless grinding machines and customized grinders. Also we have CNC machines, EDM, Wire-cutting machines and drilling machines etc. With our skilled workers, we can control very high precision of each carbide part.

    4.Packaging and Shipping

    Special-designed packing boxes and tubes will be used properly for the standard and customized carbide products to ensure the safety of the goods during the transportation process.A wide range of shipping ways can be available for your shipments, for example we can ship goods by Sea, by air and by Express companies like DHL/FedEx/UPS/TNT etc.

    1

  • Previous:
  • Next:

  • Write your message here and send it to us